AlkaWay Hydrogen Water Bottle

This is a great video from our friends at H2Minutes with some great information about hydrogen and hydrogen water bottles.

This is a great video from our friends at H2Minutes with some great information about hydrogen and hydrogen water bottles.

The recognized minimum H₂ content in H₂ water is 0.3 mg/litre.

This means that you would need to drink a litre of water to get the minimum required to support your health.

The AlkaWay Hydrogen Water Bottle can produce 5.0 mg/litre. Compare this to the only published independent test of a $5000 electric water ionizer, which only managed to produce 0.3 mg/litre.

It means that if you drank a litre of H₂-infused water from your new Hydrogen Water Bottle, you’d be getting around SEVEN times the amount of molecular hydrogen!

There have been no reported contraindications for the intake of molecular hydrogen.

When you understand the relative size of an H₂ molecule you’ll appreciate why. It sails through open spaces in our bodies. It can go everywhere, easily crossing the blood-brain barrier that other supplements cannot.

Its singular purpose is to meet and unite with a molecule in need of hydrogen.

But its size means that many H₂ molecules will simply fly on through the body, leaving via the skin.

So the volume of H₂ molecules we may ingest has a direct relationship to its ability to find and convert molecules that may be a part of a destructive element in the body.

Here at AlkaWay, we are serious about H₂. We use the UltraStream H₂ water filter and we use the Hydrogen Water Bottle, we even use an H₂ inhaler. The huge advantage for a Hydrogen Water Bottle user is that you will be able to brew up a fresh and powerful batch of H₂ water wherever you are – even out camping or hiking!

You can use any type of still water, including tap water, filtered water, mineral water or distilled water.

We would highly recommend using filtered water… if you use UltraStream water then even better!

When a water ionizer costs $5000 there’s no question! It supplies more of the only good reason to buy such a device: H₂.

However you still need a good water filter that removes the contaminants you don’t want in your hydrogen water bottle. The Bottle fills in where the UltraStream filter can’t go. It’s portable.

The cost is for the small amount of electricity the Hydrogen Water Bottle consumes.

1. It comes from a company using technology we trust and understand.
2. We’ve been testing many models for years.
3. New model with thicker platinum-coated titanium plates makes concentrated Hydrogen water faster.
4. It has the most advanced SPE and proprietary DuPont PEM technology.
5. You get top molecular hydrogen concentrates Plus you get ORP’s of -200 to -600Mv Oxidation-Reduction.
6. Get over a dozen cycles before needing another charge.
7. Premium non-toxic platinum-coated titanium electrode plates cost more but don’t leach toxic nickel, molybdenum or chromium into the water like cheap imitations.
8. Works with all portable water types: distilled, RO, filtered water and purified tap water by expelling Ozone and Hydrogen Peroxide and Chlorine from tap water into a bottom waste chamber.

No, the Hydrogen Water Bottle does not filter the water, however, unlike cheaper Hydrogen bottles, the Hydrogen Water Bottle will not add chlorine and ozone to the water.

The special PEM membrane in the Hydrogen Water Bottle allows chlorine and ozone to be separated safely from the Hydrogen water.

Simply leave a small amount of water in the bottom of the Hydrogen Water Bottle to keep the Hydrogen generating membrane wet.

The Hydrogen Water Bottle comes with a rubber protective plug that fits over the membrane when you are not using it.

You can periodically clean the electrode plates using a small amount of citric acid (5 grams in half a bottle) and let it soak for 2 hours.  After 2 hours you can shake a few times and pour out the dirty water, then rinse again with fresh water.

The base of the Hydrogen Water Bottle contains electronic components, so you should avoid getting water onto the exterior of the base and the charging port and cable.

Plug in the charger cable to the back of the Hydrogen Water Bottle. The Bottle takes approximately 3 hours to charge.

The Hydrogen Water Bottle should run for at least 15 cycles of H₂ production with one full charge of the battery.

Yes, the bubbles are a sign that the Hydrogen Water Bottle is working correctly.

SPE: Solid Polymer Electrolysis and PEM: Proton Exchange Membrane

1. Water at the anode provides a source of H+ ions.
2. PEM (Proton Exchange Membrane) permits migration of H+ ions from the anode to cathode.
3. At the cathode, H+ ions combine with electrons from the power supply (reduction reaction) to form H atoms which pair-up to form H₂ gas.
4. Oxygen gas produced at the anode (through oxidation of hydroxide) is vented. Chlorine gas may also be produced, depending on source water chloride levels. This is also vented.
5. PEM contains an electrolyte (SPE, solid polymer electrolyte, an electrical conductor), so electrolysis is not dependent on source water minerals.
6. Lower electrical resistance between anode & cathode results in less voltage drop and more efficient electrolysis