Chlorine and Fluoride Filter Replacement

Aquametix® AMB/10 Reduces Chloramines, Fluoride. Heavy Metal and VOC’s down to 1-2 microns.

AquaMetix® is a proprietary matrix comprising of at least two types of activated carbon, combined with proprietary Zeolite minerals, structurally bound with polymers into a highly porous block filter form. AquaMetix® combines the highest FDA-compliant raw materials, with cutting-edge manufacturing methods resulting in unparalleled performance in an exclusively U.S.A. Manufactured product.

Reduces the following contaminants and many more impurities in water:.

• Fluoride up to 92% up to 1800 litres
• Chloramines up to 99% up to 13300 litres
• Chlorine up to 99%
• Lead up to 99% up to 13300 litres
• Heavy Metals up to 98%
• Pharmaceutical Compounds up to 95%
• PFAS reduction >95%VOC’s up to 98% (volatile organic chemicals including Pesticides, Herbicides, Insecticides, and a range of other Chemicals.)

Maximum operating temperature 37°C; Maximum operating pressure 100 ps, does not contain activated alumina.

Capacity:

• Chloramine – up to 20,000 litres (5,500 gallons)

• Lead – up to 13,000 litres (3,500 gallons)

• Fluoride – up to 1,800 litres (500 gallons)

• PFAS – up to 1,645 litres (435 gallons)

Filter replacement:

• You should replace the filter when the lowest-capacity contaminant (usually fluoride or PFAS) reaches its limit.

• For most households using 6–10 L/day, expect to replace the filter every 6–8 months.

• If you’re targeting fluoride or PFAS specifically, and using 8 L/day, the filter may last only 6–7 months.

• If you’re only concerned about chloramine or lead, you can wait much longer.

Overview of PFAS and PFOA