Micro-Organisms & Contaminants

 

Micro-Organisms
& Contaminants

Contaminant MCL or TT1
(mg/L)2
Potential Health Effects from Ingestion of Water Sources of Contaminant in Drinking Water

Cryptosporidium

TT 3
Gastrointestinal illness (e.g., diarrhea, vomiting, cramps) Human and fecal animal waste

Giardia lamblia

TT3
Gastrointestinal illness (e.g., diarrhea, vomiting, cramps) Human and animal fecal waste

Heterotrophic plate count

TT3
HPC has no health effects; it is an analytic method used to measure the variety of bacteria that are common in water. The lower the concentration of bacteria in drinking water, the better maintained the water system is. HPC measures a range of bacteria that are naturally present in the environment

Legionella

TT3
Legionnaire’s Disease, a type of pneumonia Found naturally in water; multiplies in heating systems

Total Coliforms (including fecal coliform and E. Coli)

5.0%4
Not a health threat in itself; it is used to indicate whether other potentially harmful bacteria may be present5 Coliforms are naturally present in the environment; as well as feces; fecal coliforms and E. coli only come from human and animal fecal waste.

Turbidity

TT3
Turbidity is a measure of the cloudiness of water. It is used to indicate water quality and filtration effectiveness (e.g., whether disease-causing organisms are present). Higher turbidity levels are often associated with higher levels of disease-causing microorganisms such as viruses, parasites and some bacteria. These organisms can cause symptoms such as nausea, cramps, diarrhea, and associated headaches. Soil runoff

Viruses (enteric)

TT3
Gastrointestinal illness (e.g., diarrhea, vomiting, cramps) Human and animal fecal waste

Disinfection Byproducts

Contaminant MCL or TT1
(mg/L)2
Potential Health Effects from Ingestion of Water Sources of Contaminant in Drinking Water
Bromate
0.010
Increased risk of cancer Byproduct of drinking water disinfection
Chlorite
1.0
Anemia; infants & young children: nervous system effects Byproduct of drinking water disinfection
Haloacetic acids (HAA5)
0.060
Increased risk of cancer Byproduct of drinking water disinfection
Total Trihalomethanes (TTHMs)
0.10
———-
0.080
Liver, kidney or central nervous system problems; increased risk of cancer Byproduct of drinking water disinfection

Disinfectants

Contaminant MRDL1
(mg/L)2
Potential Health Effects from Ingestion of Water Sources of Contaminant in Drinking Water
Chloramines (as Cl2) MRDL=4.01 Eye/nose irritation; stomach discomfort, anemia Water additive used to control microbes
Chlorine (as Cl2) MRDL=4.01 Eye/nose irritation; stomach discomfort Water additive used to control microbes
Chlorine dioxide (as ClO2) MRDL=0.81 Anemia; infants & young children: nervous system effects Water additive used to control microbes

Inorganic Chemicals

Contaminant MCL or TT1
(mg/L)2
Potential Health Effects from Ingestion of Water Sources of Contaminant in Drinking Water
Antimony
0.006
Increase in blood cholesterol; decrease in blood sugar Discharge from petroleum refineries; fire retardants; ceramics; electronics; solder
Arsenic
0.010
as of 01/23/06
Skin damage or problems with circulatory systems, and may have increased risk of getting cancer Erosion of natural deposits; runoff from orchards, runoff from glass & electronics production wastes
Asbestos
(fiber >10 micrometers)
7 MFL
Increased risk of developing benign intestinal polyps Decay of asbestos cement in water mains; erosion of natural deposits
Barium
2
Increase in blood pressure Discharge of drilling wastes; discharge from metal refineries; erosion of natural deposits
Beryllium
0.004
Intestinal lesions Discharge from metal refineries and coal-burning factories; discharge from electrical, aerospace, and defense industries
Cadmium
0.005
Kidney damage Corrosion of galvanized pipes; erosion of natural deposits; discharge from metal refineries; runoff from waste batteries and paints
Chromium (total)
0.1
Allergic dermatitis Discharge from steel and pulp mills; erosion of natural deposits
Copper
TT8;
Action Level=1.3
Short term exposure: Gastrointestinal distress. Long term exposure: Liver or kidney damagePeople with Wilson’s Disease should consult their personal doctor if the amount of copper in their water exceeds the action level Corrosion of household plumbing systems; erosion of natural deposits
Cyanide (as free cyanide)
0.2
Nerve damage or thyroid problems Discharge from steel/metal factories; discharge from plastic and fertilizer factories
Fluoride
4.0
Bone disease (pain and tenderness of the bones); Children may get mottled teeth Water additive which promotes strong teeth; erosion of natural deposits; discharge from fertilizer and aluminum factories
Lead
TT8;
Action Level=0.015
Infants and children: Delays in physical or mental development; children could show slight deficits in attention span and learning abilities. Adults: Kidney problems; high blood pressure Corrosion of household plumbing systems; erosion of natural deposits
Mercury (inorganic)
0.002
Kidney damage Erosion of natural deposits; discharge from refineries and factories; runoff from landfills and croplands
Nitrate (measured as Nitrogen)
10
Infants below the age of six months who drink water containing nitrate in excess of the MCL could become seriously ill and, if untreated, may die. Symptoms include shortness of breath and blue-baby syndrome. Runoff from fertilizer use; leaching from septic tanks, sewage; erosion of natural deposits
Nitrite (measured as Nitrogen)
1
Infants below the age of six months who drink water containing nitrite in excess of the MCL could become seriously ill and, if untreated, may die. Symptoms include shortness of breath and blue-baby syndrome. Runoff from fertilizer use; leaching from septic tanks, sewage; erosion of natural deposits
Selenium
0.05
Hair or fingernail loss; numbness in fingers or toes; circulatory problems Discharge from petroleum refineries; erosion of natural deposits; discharge from mines
Thallium
0.002
Hair loss; changes in blood; kidney, intestine, or liver problems Leaching from ore-processing sites; discharge from electronics, glass, and drug factories

Radionuclides

Contaminant MCL or TT1
(mg/L)2
Potential Health Effects from Ingestion of Water Sources of Contaminant in Drinking Water
Alpha particles
15 picocuries per Liter (pCi/L)
Increased risk of cancer Erosion of natural deposits of certain minerals that are radioactive and may emit a form of radiation known as alpha radiation
Beta particles and photon emitters
4 millirems per year
Increased risk of cancer Decay of natural and man-made deposits of certain minerals that are radioactive and may emit forms of radiation known as photons and beta radiation
Radium 226 and Radium 228 (combined)
5 pCi/L
Increased risk of cancer Erosion of natural deposits
Uranium

30 ug/L
as of 12/08/03

Increased risk of cancer, kidney toxicity Erosion of natural deposits

Notes:
1 Definitions:
Maximum Contaminant Level (MCL) – The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to MCLGs as feasible using the best available treatment technology and taking cost into consideration. MCLs are enforceable standards.

Treatment Technique – A required process intended to reduce the level of a contaminant in drinking water.

2 Units are in milligrams per liter (mg/L) unless otherwise noted. Milligrams per liter are equivalent to parts per million.

3 EPA’s surface water treatment rules require systems using surface water or ground water under the direct influence of surface water to (1) disinfect their water, and (2) filter their water or meet criteria for avoiding filtration so that the following contaminants are controlled at the following levels:

  • Cryptosporidium (as of1/1/02 for systems serving >10,000 and 1/14/05 for systems serving <10,000) 99% removal.
  • Giardia lamblia: 99.9% removal/inactivation
  • Viruses: 99.99% removal/inactivation
  • Legionella: No limit, but EPA believes that if Giardia and viruses are removed/inactivated, Legionella will also be controlled.
  • Turbidity: At no time can turbidity (cloudiness of water) go above 5 nephelolometric turbidity units (NTU); systems that filter must ensure that the turbidity go no higher than 1 NTU (0.5 NTU for conventional or direct filtration) in at least 95% of the daily samples in any month. As of January 1, 2002, turbidity may never exceed 1 NTU, and must not exceed 0.3 NTU in 95% of daily samples in any month.
  • HPC: No more than 500 bacterial colonies per milliliter.
  • Long Term 1 Enhanced Surface Water Treatment (Effective Date: January 14, 2005); Surface water systems or (GWUDI) systems serving fewer than 10,000 people must comply with the applicable Long Term 1 Enhanced Surface Water Treatment Rule provisions (e.g. turbidity standards, individual filter monitoring, Cryptosporidium removal requirements, updated watershed control requirements for unfiltered systems).
  • Filter Backwash Recycling; The Filter Backwash Recycling Rule requires systems that recycle to return specific recycle flows through all processes of the system’s existing conventional or direct filtration system or at an alternate location approved by the state.

4 more than 5.0% samples total coliform-positive in a month. (For water systems that collect fewer than 40 routine samples per month, no more than one sample can be total coliform-positive per month.) Every sample that has total coliform must be analyzed for either fecal coliforms or E. coli if two consecutive TC-positive samples, and one is also positive for E.coli fecal coliforms, system has an acute MCL violation.

5 Faecal coliform and E. coli are bacteria whose presence indicates that the water may be contaminated with human or animal wastes. Disease-causing microbes (pathogens) in these wastes can cause diarrhea, cramps, nausea, headaches, or other symptoms. These pathogens may pose a special health risk for infants, young children, and people with severely compromised immune systems.

6 Although there is no collective MCLG for this contaminant group, there are individual MCLGs for some of the individual contaminants:

  • Trihalomethanes: bromodichloromethane (zero); bromoform (zero); dibromochloromethane (0.06 mg/L). Chloroform is regulated with this group but has no MCLG.
  • Haloacetic acids: dichloroacetic acid (zero); trichloroacetic acid (0.3 mg/L). Monochloroacetic acid, bromoacetic acid, and dibromoacetic acid are regulated with this group but have no MCLGs.

7 MCLGs were not established before the 1986 Amendments to the Safe Drinking Water Act. Therefore, there is no MCLG for this contaminant.

8 Lead and copper are regulated by a Treatment Technique that requires systems to control the corrosiveness of their water. If more than 10% of tap water samples exceed the action level, water systems must take additional steps. For copper, the action level is 1.3 mg/L, and for lead is 0.015 mg/L.

9 Each water system must certify, in writing, to the state (using third-party or manufacturer’s certification) that when acrylamide and epichlorohydrin are used in drinking water systems, the combination (or product) of dose and monomer level does not exceed the levels specified, as follows:

  • Acrylamide = 0.05% dosed at 1 mg/L (or equivalent)
  • Epichlorohydrin = 0.01% dosed at 20 mg/L (or equivalent)

National Secondary Drinking Water Regulations

National Secondary Drinking Water Regulations (NSDWRs or secondary standards) are non-enforceable guidelines regulating contaminants that may cause cosmetic effects (such as skin or tooth discoloration) or aesthetic effects (such as taste, odor, or color) in drinking water. EPA recommends secondary standards to water systems but does not require systems to comply. However, states may choose to adopt them as enforceable standards.

Contaminant
Secondary Standard
Aluminum
0.05 to 0.2 mg/L
Chloride
250 mg/L
Color
15 (color units)
Copper
1.0 mg/L
Corrosivity
noncorrosive
Fluoride
2.0 mg/L
Foaming Agents
0.5 mg/L
Iron
0.3 mg/L
Manganese
0.05 mg/L
Odor
3 threshold odor number
pH
6.5-8.5
Silver
0.10 mg/L
Sulfate
250 mg/L
Total Dissolved Solids
500 mg/L
Zinc
5 mg/L

Source: EPA 816-F-02-013


According to recent news and reports, most tap and well water in the U.S. are not safe for drinking due to heavy industrial and environmental pollution. Toxic bacteria, chemicals and heavy metals routinely penetrate and pollute our natural water sources making people sick while exposing them to long term health consequences such as liver damage, cancer and other serious conditions. We have reached the point where all sources of our drinking water, including municipal water systems, wells, lakes, rivers, and even glaciers, contain some level of contamination. Even some brands of bottled water have been found to contain high levels of contaminants in addition to plastics chemical leaching from the bottle.

A good water filtration system installed in your home is the only way to proactively monitor and ensure the quality and safety of your drinking water. Reverse osmosis water purification systems can remove 90-99% of all contaminants from city and well water to deliver healthy drinking water for you and your family.